How to Winterize Your Motorcycle in Eight Easy Steps

Share this article:

Temperatures are dropping, and the days are getting shorter. These are clear signs that, on one hand,  pumpkin spice lattes will soon become the drink of choice for many of us, and, on the other hand, motorcycle enthusiasts need to think about winterizing their bikes.

Properly storing your motorcycle during the winter months is crucial for its longevity and performance when riding season returns, whether you’re facing snow, ice or simply colder and wetter conditions. Here’s a step-by-step guide to help you winterize your bike:

1. Find the right place to store your bike

Simply using a motorcycle cover won’t cut it for the entire winter. Motorcycle covers are very useful to protect your bike during the riding season, but you need to find an enclosed, dry space to keep it for the four to five months you won’t be able to take it out on the road. And many, if not most, rental apartments don’t come with access to a garage. The next best solution is to rent a self storage unit. Self storage units ensure just the right environment for motorcycle storage, and a 5’x10’ storage unit is large enough for a standard motorcycle, with room to spare for tools and other belongings you might not need at home.

Seeing as motorcycles have plenty of financial and sentimental value, the cost of renting a self storage unit is worth it. The monthly street rate for a 5’x10’ storage unit hovers around $80 at a national level, according to Yardi Matrix. However, prices in your area can be lower or higher, depending on where you live. For example, the same size of storage unit in Boston will cost you a little above $140, while one in Indianapolis can be rented for $60. Below, you can check out self storage prices and availability in some of the country’s major cities:

2. Change the oil and the filters

Now that you have found just the right place to store your motorcycle during the winter, it’s time to prepare it for storage. Start by changing the oil and the filters. Used oil contains various particles and contaminants that can be harmful to the engine if left in the engine for extended periods of time.

3. Top off the fuel tank

Putting your motorcycle in storage with its tank full of gas will ensure that your engine will run smoothly the following spring. This way, you are preventing condensation and, thus, rust from occurring on the inside of the fuel tank. Make sure you also add some fuel stabilizer to the gasoline. Run the engine for a few minutes, to make sure that the fuel stabilizer reaches the entire system.

4. Lubricate the moving parts to prevent degradation

When a motorcycle sits unused for an extended period, its moving parts, such as cables and levers,  could seize due to rust or could become stiff and difficult to move. Pay extra attention to lubricating the moving parts in order to create a protective barrier that helps shield them from moisture, corrosion and other environmental factors. Protecting the moving parts of your motorcycle is very important in terms of safety, as they ensure the precise operation of controls, such as the throttle, clutch, or brakes.

Person spraying motorcycle wheel with lubricant

5. Give your motorcycle a good cleanup

You completed all the “dirty jobs” involving engine oil, lubricants, and fuel. So, it’s time to clean up your bike thoroughly to remove dirt, grime, salt, and other particulates from the roads. Pay extra attention to the frame, exhaust, and wheels, as these areas are most susceptible to corrosion. After you clean the bike, you should also wax the paint in order to protect it during storage.

6. Deal with the battery

There are two ways to protect the battery during long-term storage: disconnect it or use a battery tender to keep it charged throughout the winter. This ensures the battery remains in good condition and doesn’t lose its charge.

7. Protect the tires

Make sure that the tires are inflated to the recommended pressure before putting the motorcycle in storage. However, it’s also important to keep the tires off the ground. This helps prevent flat spots from forming during extended periods of inactivity. Flat spots can result in an uneven and uncomfortable ride when you start using the motorcycle again. Lifting the tires off the ground also reduces the risk of tire degradation. Over time, tires in constant contact with the ground can develop cracks. To avoid such problems, consider using a paddock stand. These specialized stands lift the motorcycle off the ground by supporting it from beneath the swingarm or forks. Paddock stands are widely available, are designed for this specific purpose and can easily fit in a 5’x10’ storage unit.

8. Perform periodic maintenance

Your motorcycle will be safe inside the storage unit, but it’s recommended that you drop by every few weeks or so, to see with your own eyes that everything is in good order. Ensure the battery remains charged and that there are no signs of moisture or corrosion. Most self storage facilities have generous operating hours, with many even allowing 24/7 access to renters, which means you’ll be able to visit your storage unit whenever you have time, even in the evenings or over the weekend.

Winterizing your motorcycle is a necessary step to protect your investment and ensure it’s ready to hit the road when the weather warms up. By following these steps and giving your bike the care it deserves during the off-season, you can enjoy a trouble-free riding experience for years to come.

Share this article:

Maria Gatea is a real estate and lifestyle editor for Yardi with a background in Journalism and Communication. After covering business and finance-related topics as a freelance writer for 15 years, she is now focusing on researching and writing about the real estate industry. You may contact Maria via email.

The Ready Renter Has Your Back

Tips, news, and research curated for renters, straight to your inbox.

Something went wrong. Please check your entries and try again.

Related posts

The skyline in Seattle, a city where the cost of living is higher than state and national averages.

Cost of Living in Seattle: What Renters Should Know Before Moving

Deciding where to rent next takes more than just browsing rental apartment listings. Whether you’re relocating for work, school or a fresh start, it’s important…

Essential tools and electrical components laid out on a white surface, including pliers, electrical tape, a power socket, LED bulb, and utility knife, familiar to renters learning how to set up utilities for the first time.

How to Set Up Utilities for the First Time: Your New Apartment Starter Pack

You started packing for the big day: you’re finally moving into your first apartment! Yet nothing kills the vibe quite like realizing you have no…

The skyline of downtown Pittsburgh to illustrate the article on the best affordable neighborhoods for renters in Pittsburgh.

What Are the Best Affordable Neighborhoods in Pittsburgh?

Pittsburgh is quickly becoming one of the most attractive cities for renters in the U.S. In fact, the city is currently the 20th hottest rental…

Enjoying this post?

Sign up for The Ready Renter newsletter

Something went wrong. Please check your entries and try again.